Flaming-river Steering Wheels Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Hardware Flaming-river Steering Wheels herunter. Flaming River Steering Wheels User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 1
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
800 Poertner Drive
Berea, OH 44017
1-800-648-8022
www.flamingriver.com
Note: Horn relay must be used for proper operation of system. Battery must be disconnected before starting
installation.
Installation:
1) Make sure that front wheels are centered and straight.
2) Position the canceling cam so that it is in between the 10 and 11 o’clock position. ( figure A )
3) Place the steering wheel adapter on the column ensuring that one wheel mounting hole is in the 12
o’clock position. (see figure B )
4) Tighten the 7/8” center nut until the wheel adapter has approximately 1/16 inch between the adapter
and the column shroud.
5) Install the horn contact kit (part FR20120HN) into the canceling cam stem. (Follow instructions with kit).
6) Place horn button retaining ring, flange facing down, through center hole of steering wheel.
7) Next place horn button through retaining ring so that horn button is locked into place.
8) Run wire from horn contact kit to terminal on back of horn button. If horn button has two terminals on
back run a wire from the second terminal to the adapter itself to complete ground. (See Fig. C)
9) Mount steering wheel to adapter using screws provided with adapter.
10) If wheel has a center pad, mount it to wheel using appropriate fasteners.
11) Reconnect battery
WHEEL ADAPTER HORN BUTTON
Figure B
Figure C
INSTALLATION BULLETIN # 6001
DATE: 27 AUGUST 03 (Rev. 10.20.05)
WARRANTY: 1 YEAR FROM DATE OF PURCHASE. REPLACEMENT OF PRODUCT DEEMED DEFECTIVE BY THE FACTORY. LABOR NOT
INCLUDED.
SUBJECT: INSTALLATION OF STEERING WHEEL & ADAPTER
DESCRIPTION: INSTALLATION OF FLAMING RIVER STEERING WHEEL ADAPTER & SETTING CANCELING CAM POSITION.
NOTE: For Waterfall wheels, use the mounting hardware included in all Waterfall wheel
adapters to mount the wheel.
Seitenansicht 0
1

Inhaltsverzeichnis

Seite 1

800 Poertner Drive Berea, OH 44017 1-800-648-8022 www.flamingriver.com Note: Horn relay must be used for proper

Kommentare zu diesen Handbüchern

Keine Kommentare